Steering Wheel Tester

Plug in your racing wheel, press a button and turn it lock to lock. We show the rotation in degrees, every pedal's travel, every axis and button, and we catch the pedal spikes and dead spots that ruin a lap.

Runs 100% in your browserFree, no sign-upInstant diagnosis

How to test your steering wheel

  1. Connect the wheel base with USB and plug the pedals (and shifter) into the base, or into the computer if they have their own USB cable.
  2. Install the driver for your brand — Logitech G HUB, the Thrustmaster drivers, Fanatec driver or Moza Pit House — and close any game that's running.
  3. Press any button on the wheel so the browser detects it. If you have separate pedals or a shifter, pick them in the device selector.
  4. Set the rotation (270°, 540°, 900° or 1080°) to match your driver, then turn the wheel fully left and right.
  5. Press each pedal all the way down slowly, then quickly. Watch for jumps in the bars.
  6. Click Measure sensor noise, let go of everything for 3 seconds and read the diagnosis.

What the results mean

CheckHealthyProblem
Steering rangeReaches −1.000 and +1.000Stops short = calibration or rotation setting
Pedal travel0% to 95–100%Never reaches 100% = needs calibration or something blocks it
Spikes0Reading jumps and comes back = dirty or worn potentiometer
Noise at restBelow ±2%Higher = jittery sensor, add a small deadzone

Fixing spiking pedals

Spikes — the throttle or brake jumping to 30–100% for a split second — are the most common sim-racing fault. They come from dust and wear on the potentiometer inside the pedal. Unplug the pedals, open the pedal base, and spray electronic contact cleaner into the potentiometer while pumping the pedal 20–30 times. Let it dry, recalibrate in the driver software and test again. If spikes come back quickly, a Hall-effect sensor or a load-cell brake upgrade fixes it for good.

Wheel not detected?

  • Logitech G29/G923 for PlayStation have a mode switch — set it to PS3 or use the PC mode for your model.
  • Thrustmaster wheels show up only after the base finishes its calibration spin; wait until it stops.
  • Some wheels appear as a standard gamepad if a compatibility mode is on. Switch the wheel to PC mode in its software.
  • Phones and tablets don't pass wheels to the browser — use a computer.

Where this test works

Device or browserWorksNotes
WindowsYesBest support: install the maker's driver first.
Mac & LinuxMost wheelsLogitech and Thrustmaster work; some direct-drive bases need Windows.
Force feedbackNoBrowsers can't drive FFB motors — use the maker's software.
Phones & tabletsNoWheels and flight sticks aren't passed to mobile browsers.

Frequently asked questions

Can I test force feedback?

Not in a browser. Force feedback needs the game or the maker's software (G HUB, Thrustmaster Control Panel, Fanatec Control Panel) — use their built-in FFB test. Everything else, from steering to pedals and buttons, works here.

Which wheels work?

Any wheel that Windows, macOS or Linux sees as a game controller: Logitech G29, G920, G923 and G Pro, Thrustmaster T150, T300, T248 and TX, Fanatec CSL DD and ClubSport, Moza R5/R9/R12, Simagic and most pedal sets and shifters.

Why does my pedal rest at 100%?

Many pedals report 'released' as one end of the axis and 'fully pressed' as the other. We detect where each pedal rests and show it as 0%, so you always see real travel.

My combined pedals share one axis — is that a fault?

No. Older wheels (and some games' combined mode) put throttle and brake on one axis. Turn on separate axes in the driver if your game needs them.

How do I calibrate my wheel on Windows?

Press Win+R, type joy.cpl, pick the wheel, then Properties → Settings → Calibrate. Brands with their own software calibrate there instead.

More tests: Controllers, wheels & joysticks