Joystick Tester

Connect your flight stick, HOTAS or arcade stick and press a button. We plot the stick, show twist, throttle and every other axis, read the hat switch, count every button and measure how well the stick centres.

Runs 100% in your browserFree, no sign-upInstant diagnosis

How to test a joystick

  1. Plug in the stick (and the throttle, if it's separate) with USB and install the maker's driver.
  2. Press a button so the browser detects it. Pick the throttle or rudder pedals in the device selector if they're separate devices.
  3. Move the stick to every edge and roll it around — the plot should fill the whole square.
  4. Twist the stick and move the throttle end to end; each appears as its own bar.
  5. Press every button and push the hat switch in all 8 directions.
  6. Click Measure sensor noise, let go of the stick and read the diagnosis.

What we check

CheckHealthyProblem
X / Y rangeReaches every edgeStops short = needs calibration
Centre offsetBelow 4%Above 10% = worn spring or sensor
Jitter at restBelow ±2%Higher = noisy sensor, add a deadzone
Spikes0Axis jumps and returns = dirty potentiometer

Calibrating a joystick on Windows

Press Win+R, type joy.cpl and press Enter. Select the stick, choose Properties → Settings → Calibrate, and follow the wizard: leave it centred, move it to every corner, then sweep the twist and throttle. Retest here afterwards. Thrustmaster, Logitech/Saitek and VKB sticks can also be calibrated in their own software.

Arcade sticks and fight sticks

Arcade sticks with a digital lever show up either as a D-pad (hat switch) or as two axes that only jump between −1, 0 and +1 — both are normal. Check that all four directions and the diagonals register and that no direction sticks after you let go. Most fight sticks have a mode switch (XInput, DInput, PS) that changes how they appear.

Where this test works

Device or browserWorksNotes
WindowsYesBest support: install the maker's driver first.
Mac & LinuxMost wheelsLogitech and Thrustmaster work; some direct-drive bases need Windows.
Force feedbackNoBrowsers can't drive FFB motors — use the maker's software.
Phones & tabletsNoWheels and flight sticks aren't passed to mobile browsers.

Frequently asked questions

Does it work with HOTAS setups?

Yes. Thrustmaster T.Flight HOTAS, T.16000M, Warthog, Logitech X52/X56 and VKB or Virpil sticks all show their axes and buttons. Separate throttles and rudder pedals are listed as their own devices.

Why are some of my buttons missing?

Browsers read up to the number of buttons the device reports. Very large HOTAS setups with modes or shift layers may expose extra buttons only in the maker's software.

What is a hat switch?

The small 8-way thumb switch on top of a flight stick. Many devices report it as a single axis with fixed steps — we detect that and show the direction instead of a number.

Can I test a phone or tablet joystick?

Phones and tablets don't pass flight sticks to the browser. Use a Windows, Mac, Linux or ChromeOS computer.

More tests: Controllers, wheels & joysticks