TestEveryDevice / Controllers, wheels & joysticks / Controller Polling Rate Test

Controller Polling Rate Test

Connect your controller, click Measure polling rate and keep rolling a stick for 3 seconds. We count how often new data actually arrives and show the result in Hz — so you can compare USB, Bluetooth and dongles.

Runs 100% in your browserFree, no sign-upInstant diagnosis

How the measurement works

A controller sends its state to the computer a fixed number of times per second — its polling rate. While you move a stick, every report changes the data. We read the controller as fast as the browser allows and time how often new data arrives, then take the median interval. A 4 ms interval is 250 Hz; 8 ms is 125 Hz.

Browsers have their own limit: Chrome and Edge read controllers at up to about 250 Hz. If your controller is faster, we show it as at least that number.

Typical polling rates

ControllerUSBBluetooth
PS5 DualSense250 Hz (higher with community drivers)~250 Hz
PS4 DualShock 4250 Hz~125–250 Hz
Xbox Series X|S / One~125–250 Hz~125 Hz
Switch Pro~125 Hz~60–125 Hz
Gaming pads with 1000 Hz modes500–1000 Hz (browser shows ≥ 250)Varies

Values vary with firmware, drivers and the computer. Measure your own pad to know for sure.

How to get a higher polling rate

  1. Use a USB data cable instead of Bluetooth.
  2. Plug into a USB port on the computer, not a hub or front-panel extension.
  3. Use the maker's 2.4 GHz dongle if your controller has one — it's usually faster and steadier than Bluetooth.
  4. Turn on high polling modes in the maker's app where they exist.
  5. Close Steam Input, DS4Windows or other tools while measuring, as they can add their own delay.

Where this test works

Device or browserWorksNotes
Windows, Mac, Linux, ChromeOSYesChrome, Edge, Firefox and Safari read controllers over USB and Bluetooth.
VibrationChrome & EdgeFirefox and Safari can't control rumble motors.
AndroidYesChrome, over USB-OTG or Bluetooth.
iPhone & iPadYesSafari, with PlayStation, Xbox or MFi pads paired in Settings → Bluetooth.

Frequently asked questions

Does a higher polling rate reduce input lag?

Yes, a little. Going from 125 Hz to 1000 Hz cuts the average wait for a new report from 4 ms to 0.5 ms. It matters most in fast shooters and fighting games; in slower games you won't feel it.

Why does my result say 'at least'?

Your controller reported faster than the browser can read it. The real rate is higher than the number shown — the browser is the limit, not the pad.

Why is Bluetooth lower than USB?

Bluetooth sends reports less often and has to share the radio with other devices. Many controllers also lower their rate on Bluetooth to save battery.

Do I have to move the stick?

Yes. Controllers only send new values when something changes, so a stick at rest would look like a very low rate. Keep rolling it for the whole 3 seconds.

More tests: Controllers, wheels & joysticks