How it works
A real double click takes at least 80–100 ms. A worn mouse switch can 'bounce' and send a second click just a few milliseconds after the first. We flag every pair of clicks closer than the threshold (80 ms by default, adjustable).
How to fix a mouse that double clicks
- Try another USB port and another computer to rule out software.
- If your mouse software has a debounce setting, raise it.
- Blow compressed air into the gap around the button while clicking.
- Under warranty? Most brands replace mice with double-click faults.
- Comfortable with a soldering iron? Replacing the switch fixes it permanently — optical switches don't chatter.
Why mice start double clicking
Inside every mouse button is a small switch with metal contacts. Over time the contacts wear or oxidise and bounce — one press makes contact twice within a few milliseconds, which the computer sees as a double click. It's one of the most common mouse faults and often appears after 1–3 years, especially with Omron switches in popular gaming mice.
Settings that look like double clicking
- Windows ClickLock (Mouse settings → Additional mouse settings) makes the button act held down.
- A very slow double-click speed setting makes two separate clicks count as a double click.
- Macros or button assignments in G HUB, Razer Synapse or similar software.
Where this test works
| Device or browser | Works | Notes |
|---|---|---|
| Windows, Mac, Linux, ChromeOS | Yes | All buttons, scroll and polling rate in Chrome, Edge, Firefox and Safari. |
| Polling rate | Up to ~1000 Hz | Chrome and Edge report the most accurate high polling rates. |
| Side buttons | Yes | Back/forward are blocked inside the test so they don't leave the page. |
Frequently asked questions
What threshold should I use?
80 ms is a safe default. Fast clickers who butterfly-click can lower it to 50 ms; any gap below 30 ms is almost always a faulty switch.
Can software cause double clicks?
Rarely. Check the Windows double-click speed and any mouse software macros, then retest.
How many accidental double clicks mean the mouse is broken?
One in a long session can be a slip of the finger. Several within a minute of normal clicking, especially with gaps under 30 ms, means the switch is failing.
Can I fix double clicking without opening the mouse?
Sometimes: blow compressed air around the button, raise the debounce time in the mouse software if it has one, or use the warranty. A permanent fix is cleaning or replacing the switch.
More tests: Mice
- Mouse Tester – Buttons, double click, Hz
- Mouse Polling Rate Test – Check 500/1000/4000 Hz
- Mouse DPI Test – Measure your real DPI
- Logitech Double Click Test – G Pro, G502, MX Master